Page 126 of 244
3.7. Low Contrast Resolution evaluation
3.7.1. Low Contrast Resolution standards
Parameter LSL (Lower Specification Limit) USL (Upper Specification Limit)
Low Contrast Resolution - 9.0 mm
3.7.2. Phantom Specification
S&C Phantom
3.7.3. Test Method
1. The evaluation is conducted in the same manner as in the evaluation method in Section 6.3.
3.7.4. Test Result
Parameter LSL Measurement value USL Pass/Fail
Low Contrast Resolution - 8 mm
To Next Page
Loading...
