Vatech A9 PHT-30CSS - Page 160

Page 159 of 244
5.5.2. Test Method
1. Complete the collimator setup and acquire the image in the stopped state.
2. Run the C:\VCaptureSW\Util\EzEval_Phantom\EzEval.exe program.
3. Input the threshold 75%, and check whether the Collimator Alignment Result is satisfied with
the standard.
5.5.3. Test Result
Parameter LSL Measurement value USL Pass/Fail
Threshold
70%
Upper 1 10
Lower 1 10
Left 2 2
Right 1 2