Veeder-Root EMR4 Application Guide

7
EMR
3
- Truck Installations
EMR4 Truck Installation Installation Procedures - Fuel Oil Truck Application
5. Replace the adjuster dust cover plate on the front of the meter.
6. If you have the optional temperature probe, remove the existing temperature probe and replace it with the
Display Head temperature probe.
Figure 2. Remove Adjuster Dust Cover Plate
Remove two screws to
remove dust plate cover
Cover

Veeder-Root EMR4 Specifications

General

Brand	Veeder-Root
Model	EMR4
Category	Measuring Instruments
Language	English