Appendix I • Sensor Care
This section lists various approved cleaning methods, but it is important to use the correct method. Start with
Determine
Method of Cleaning on the next page
.
I.1 Cleaning the Sensor
125
I.1.1 Required Materials
125
I.1.2 Determine Method of Cleaning
126
I.1.3 Method One
126
I.1.4 Method Two
126
I.1.5 Method Three
126
I.1.6 Method Four
127
I.1 Cleaning the Sensor
CAUTION
READ THROUGH THIS ENTIRE SECTION BEFORE CLEANING
YOUR VLS-128 SENSOR
Improper handling can permanently damage it.
I.1.1 Required Materials
1. Clean microfiber cloths
2. Mild, liquid dish-washing soap
3. Spray bottle with warm, clean water
4. Spray bottle with warm, mildly soapy water
5. 70% isopropyl alcohol (Method 2 ONLY)
6. NACL Precision Optics Cleaner (Method 3 ONLY, Optional)
7. Simple Green (Method 4 ONLY)
8. Distilled water (Method 4 ONLY)
9. 99% isopropyl alcohol (Method 4 ONLY)
Note: Avoid using hard water when cleaning the VLS-128 sensor.
Appendix I • Sensor Care 125
To Next Page
Loading...
Need help?
General
