121
13.2.2 Edit WiFi Network.
Step Terminal Display Action
1
1. Reset Terminal
2. Delete S&F
3. Network
4. Bluetooth Config
On the main menu select the “Utility” option on the
touch screen or enter the number of the menu item
using the keypad�
In the Utility menu select the “Network” option on
the touch screen or enter the number of the menu
item using the keypad�
2
1. WiFi
2. GPRS
3. Ethernet
4. Dial Up
Select Type
Select the “WiFi” option on the touch screen or enter
the number of the menu item using the keypad�
3
1. Scan New
2. WiFi 1
3. Disable
Enabled
Select the “WiFi 1” option on the touch screen or
enter the number of the menu item using the keypad�
Note: WiFi Network menu will now show “WiFi 1”
instead of “Add WiFi” as this is the WiFi connection
remembered by the terminal�