Attendant Service 4
SBX IP 320 Features & Operation Guide
Attendant Forward
The attendant can forward (Unconditional Call Forward) a call to another station. The
forwarded-to Station will substitute for the attendant temporarily, while the attendant is in the
forwarded state.
Operation
It is the same procedure as the Unconditional Call Forward.
To activate Attendant Forward:
1. Lift the Handset or press the [SPEAKER] button.
2. Press the [DND/FOR] button.
3. Dial Call Forward Code 1 (Unconditional Call Forward).
4. Dial Station number.
5. Hang up the handset and go on-hook.
To deactivate Attendant Forward:
In an idle state, press the [DND/FOR] button.
-or-
In an off-hook state, press the [DND/FOR] button and dial #.
Condition
• If the attendant assigns unconditional call forward to an SLT or WHTU, the forwarded-to
station only serves incoming calls as an attendant call or attendant recall. The
forwarded-to SLT or WHTU cannot activate attendant features.
To Next Page
Loading...
