External Device Control 81
SBX IP 320 Features & Operation Guide
Admin Programming
• ICM Box Signaling (PGM 111 - FLEX 6)
• Station ID Assignment (PGM 110)
• ICM Box Music Channel (PGM 171 - FLEX 3)
• ICM Box Timer (PGM 181 - FLEX 6)
Loud Bell
The Loud Bell Control (LBC) contacts are activated when the assigned station receives ringing
from an incoming CO line (if assigned ring), transferred CO line, or intercom call.
Conditions
• Two LBC contacts can be assigned individually to the station. All the contacts may be
assigned to the same station but, only the first contact will be activated in the intercom
call.
• The LBC 1 can be programmed to be operated as an external night ring contact as well as
a LBC contact.
• In the night mode, LBC 1 will follow UNA ring assignment and will ignore the station
ring.
• An external ringing device should be attached to the contacts.
Admin Programming
• External Night Ring (PGM 160 - FLEX 7)
• Universal Night Answer (PGM 141 - FLEX 8)
• External Control Contacts (PGM 168)
To Next Page
Loading...
