Call Handling 62
SBX IP 320 Features & Operation Guide
Station Call Coverage
This feature permits a user (a covering station user) to receive ring and answer calls directed
from a covered station. A Flex button is assigned at the covering station for calls to the covered
station. A station can have multiple Call Coverage buttons, each covering a different station.
Multiple stations can have a Call Coverage button for a covered station.
When a covered station rings, the {CALL COVERAGE} button LED will flash and the
covering station may receive ring (immediate or delayed) for the call. The covering station can
answer the call using the {CALL COVERAGE} button, terminating ring at other stations. Once
answered, the LED of {CALL COVERAGE} buttons for the station at other covering stations
will extinguish.
Operation
To assign Call-Coverage button toa flexible button (program by call coverage station):
1. Press the [TRANS/PGM] button.
2. Press a flexible button to program the Call Coverage button.
3. Press [TRANS/PGM] button and dial 46.
4. Enter Station number to cover.
5. Press the [HOLD/SAVE] button.
To set Call-Coverage Attributes (station program by call coverage originated station):
1. Press the [TRANS/PGM] button.
2. Dial 45.
3. Dial 1 to program call coverage mode.
4. Enter 1 to activate call-coverage (0 to disable).
5. Press [HOLD/SAVE].
To set Call-Coverage Delay Ring Cycle (station program by call coverage originated station):
1. Press the [TRANS/PGM] button.
2. Dial 45.
3. Dial 2 to enter call coverage delay ring cycle.
4. Dial delay ring cycle (0-9).
5. Press [HOLD/SAVE].
To Next Page
Loading...
