Call Handling 48
SBX IP 320 Features & Operation Guide
Headset
An industry-standard headset can be connected to a Station instead of using the handset. The
Station is programmed for headset operation in place of speakerphone operation.
Operation
To change the Station mode between Speakerphone or Headset:
1. Press the [TRANS/PGM] button.
2. Dial code 75.
3. The Station Answer mode should be displayed on the LCD.
4. Dial code 1 (Speaker mode) or 0 (Headset mode).
To change the Headset Ring mode:
1. Press the [TRANS/PGM] button.
2. Dial code 76.
3. The Station Answer mode should be displayed on the LCD.
4. Dial the applicable code
1 = Speaker ring only
2 = Headset only
3 = Both
Conditions
• The intercom signaling mode (HF/TN/PV - [TRANS/PGM] + 1 + 2) can be set in
Headset and Speaker phone mode.
• In Headset mode, the User can select an incoming ring mode to hear ringing with the
speaker, headset, or both by Admin programming.
• The station will receive paging with the Station speaker.
• To answer an intercom call in Tone mode, the User should press the [MON] button.
• When an intercom call is received in Privacy mode, the station will be muted
automatically. User should press the [MUTE] button to answer the intercom call.
Admin Programming
• Headset Ring Mode (PGM 111 - FLEX 10)
• Speakerphone/Headset (PGM 111 - FLEX 11)
To Next Page
Loading...
