Call Control 16
SBX IP 320 Features & Operation Guide
Automatic Call Release
When a Station does not initiate dialing on an outgoing CO line or receives a no answer on an
intercom call, the System will disconnect the call based on the assigned Auto Release Timer
(ADMIN PGM 180 - FLEX 14). If the User Station is in speaker phone or [SPEAKER] mode,
the Station will return to idle, otherwise the station will receive an error tone if using the
handset.
Conditions
• An Intercom call in H/F mode is considered answered and Station Auto Release will not
be activated.
• When the Automatic Release time is assigned as 0, Auto Call Release is not activated.
• While making a call without lifting the handset and the Auto Release timer expires, the
call will be canceled and the station will return to an idle state automatically.
• While making a call using the handset and the Auto Release timer expires, the call will be
canceled and the station will receive an error tone.
Admin Programming
• Automatic CO Release Timer (PGM 180 - FLEX 14)
• Station Auto Release Timer (PGM 182 - FLEX 5)
To Next Page
Loading...
