Outgoing Call Access 139
SBX IP 320 Features & Operation Guide
Call Time Restriction
The Call Time Restriction feature is used to restrict outgoing CO call time. In Station
programming, the User can set the Call Cut Off timer, whereas the call will be disconnected
automatically when the timer expires. The called and called parties will hear a warning tone 15
seconds before the call is disconnected.
Conditions
• This feature can be assigned on a station-by-station basis, and is applied to just outgoing
CO calls.
• If the Call Cut Off timer is enabled on a Station, the timer is still applicable when a call is
transferred to another Station.
• On the add-on conference, the Call Cut Off timer-enabled Station will be restricted to the
outgoing CO call time.
• The Call Cut Off timer is not released when the call is placed on hold or is transferred.
Admin Programming
• CO Call Time Restriction (PGM 112 - FLEX 3)
• Call Cut-Off Timer (PGM 113 - FLEX 12)
To Next Page
Loading...
