Vertical SBX IP 320 - Voip Service; Call by IP Address

VoIP Service 227
SBX IP 320 Features & Operation Guide
VoIP Service
Call by IP Address
This feature is established by receiving IP numbers or dialing IP numbers directly.
Operation
To make an IP call by address:
1. Press the desired {CO} line, {POOL}, or {LOOP} button.
-or-
Dial the CO line or Group code.
2. Dial tone sounds, then dial the IP address (use the * key in place of where the dots "." of
the IP address would be used). Ex., IP Address: 156.147.3.201, Dialed
number:156*147*3*201)
3. Press the # button to place the call. If the Called Party is a user in the SBX IP 320 System,
ringing will follow the pre-defined Ring Assignment (PGM 144).
Conditions
• When programming Speed Dial for Direct Call, the # key must not be used (ex., to assign
156*147*3*139 to Speed Dial, enter 156*147*3*139, and not 156*147*3*139#).
• In DISA incoming calls, CO access is denied if the line seized by dialing Co access Code
is a VOIB line.
Admin Programming
• CO Line Service Type (PGM 140)
• VOIB IP Setting (PGM 340)