Call Handling 72
SBX IP 320 Features & Operation Guide
Wakeup
Each attendant or station user can set an alarm as a wake-up call or reminder. This feature can
be programmed to activate one time or programmed to repeat daily. If the user goes off-hook
during the alarm, a special dial tone will be presented.
Operation
To register a wake-up time alarm from the Attendant Station:
1. Press the [TRANS/PGM] button.
2. Dial 042.
3. Dial the station range to be alerted. If a single station is to receive the alarm, enter *
instead of a second station number.
4. Dial the desired time the alert should display (2-digit hour and minute, 24-hour mode.
5. Dial # to have the alarm alert once only.
6. Press the [HOLD/SAVE] button.
To cancel a wake-up alarm from the Attendant Station:
1. Press the [TRANS/PGM] button.
2. Dial 043.
3. Dial the station range that was to be alerted, if a single station is to receive alarm, enter *
instead of a second station.
4. Press the [HOLD/SAVE] button.
To register wake-up time alarm from a Station:
1. Press the [TRANS/PGM] button.
2. Dial 41.
3. Dial the desired 2-digit hour and minute for alerting.
4. Dial # to have the alarm alert once only.
5. Press the [HOLD/SAVE] button.
To Next Page
Loading...
