Call Handling 61
SBX IP 320 Features & Operation Guide
On-Hook Dialing
A station can make a call without lifting the handset by using the speakerphone or monitor
mode.
If this feature does not operate, verify if the speakerphone is enabled or disabled. On-hook
dialing is not available on all keysets.
Operation
To use On-hook dialing, use the following procedure:
1. Verify that the Auto Speaker Selection is ON.
2. Assign a CO line/Intercom/Speed Dial to a flexible button.
3. Press the flexible button.
-or-
1. Verify the Auto Speaker Selection OFF.
2. Assign a CO line/Intercom/Speed Dial to a flexible button.
3. Press the flexible button. LIFT HANDSET will display on the LCD.
4. Lift handset or press the [SPEAKER] button to operate.
Admin Programming
• Auto Speaker Selection (PGM 111 - FLEX 1)
To Next Page
Loading...
