Call Handling 70
SBX IP 320 Features & Operation Guide
Time & Date Setup (Digital Network)
In an outgoing call, the ISDN network will send the appropriate time & date in the CONNECT
message when the called party answers.
Operation
To set the time & date using the Digital Network:
1. Press the [TRANS/PGM] button.
2. Dial 046 and 1 (Yes).
3. Press the [HOLD/SAVE] button.
Conditions
• This feature may be set at the Attendant Station and using Admin Programming.
• The time & date can be set to a default value or changed based on seasonal time changes.
Voice Over
This feature provides voice announcements at a busy station without interrupting the existing
conversation. The announcement is received over the existing conversation so that only the busy
station hears both incoming parties. The user can alternately talk back to both parties.
Operation
To use Voice Over:
1. A busy station is called and camped-on by a new caller. The busy station hears a warning
tone over the current voice path indicating the camped-on call.
2. The busy station is connected with both the current caller and a new caller (the busy
station can send and receive voice to both simultaneously; the new caller and a current
caller cannot send and receive voice to each other.
3. Press the flashing [HOLD/SAVE] button of the busy station; the current caller will hear
MOH if available, and the busy station will be connected with the new caller.
4. Alternate between calls by pressing the [HOLD/SAVE] button.
To Next Page
Loading...
