Vertical SBX IP 320 - Chime Bell

Call Handling 34
SBX IP 320 Features & Operation Guide
Chime Bell
If the Chime Bell Activate Station presses Chime Bell button, Chime Bell Receive Station starts
to ring.
To program a flexible button as the "Chime Bell button":
1. Press the [TRANS/PGM] button and the flexible button to be assigned.
2. Dial the code ([TRANS/PGM] + *9).
3. Press the [HOLD/SAVE] button.
Operation
To Activate the Chime Bell:
Press the Chime Bell button at the Chime Bell Activate station
To program a flexible button as the "Chime Bell button":
1. Press the [TRANS/PGM] button and the flexible button to be assigned.
2. Dial the code ([TRANS/PGM] + *9)
3. Press the [HOLD/SAVE] button.
Conditions
• The ring stops when Chime Bell Timer expires.
• Chime Bell Ring cannot be answered.
• If Chime Bell Receive station is busy or in an Off-Hook state, the station gets Mute ring
instead.
• The Chime Bell master (active station) and slave (receive station) station should be
keysets.
Admin Programming
• Chime Bell Station Pair (PGM 184 - FLEX 1)
• Chime Bell Relay (PGM 184 - FLEX 2)
• Chime Bell Timer (PGM 184 - FLEX 3)
• Chime Bell Frequency (PGM 184 - FLEX 4)