Call Handling 66
SBX IP 320 Features & Operation Guide
4. Enter the name (up to 12 letters).
5. Hook-flash to save.
Conditions
• Dial by name is only available on a DKTU with LCD.
• The name must be registered to use Dial By Name.
• If an invalid Group is dialed, an error tone will be heard.
• In SLT and DKTU with no LCD, only the station name can be entered.
• The speed dial without name will not be listed by Dial By Name.
Station Port Blocking
The station port can be blocked by admin program. No calls can be made from/to the blocked
station port.
Conditions
• Attendants cannot be blocked by admin programming.
• An ADMIN programming-enabled station cannot be blocked.
• A port blocked station cannot be set as part of a linked pair.
• If Station A (110) and B (111) are a linked pair, and these stations are set to port block,
the two stations are port blocked at the same time, but if the linked pair relationship is
terminated, these two stations are still port blocked at each station.
Admin Programming
• Station Port Block (PGM 113 - FLEX 15)
To Next Page
Loading...
