Vertical SBX IP 320 - Voice Service; DID Call to each Stations Voice Mailbox (Future Feature); Direct Transfer to VMIB

Voice Service 212
SBX IP 320 Features & Operation Guide
Voice Service
DID Call to Each Station's Voice Mailbox (Future Feature)
A maximum of 1000 Flexible DID Table entries can be programmed. Each Flexible DID Table
entry has five attributes - "DID Name", "Day Destination", "Night Destination", "Weekend
Destination", and "Reroute Destination". If the destination of Flexible Conversion DID table
(PGM 231) is programmed as the Station 's VMIB, a DID Call is routed to the Station's VMIB
and an external DID caller can leave message directly.
Conditions
• If the Day/Night/Weekend DID destination is busy, call is rerouted to Reroute
Destination
• VMIB Access option must be ON (PGM 113 - FLEX 2).
Admin Programming
• VMIB Access (PGM 113 - FLEX 2)
• DID Destination (PGM 231)
Direct Transfer to VMIB
A CO/ICM Call can be transferred directly to a station's voice mailbox.
Operation
Below operation is executed at transferring Station:
1. Station is on a CO/ICM call.
2. Press the [TRANS] button to transfer to another station.
3. Press the [CALL BK] button.
4. Dial a destination Station number or press the DSS button of the desired Station.
5. Hang up when transfer is completed. After transfer action is ended, the transferred party
hears a recorded message and a confirmation tone; then they can record a voice message.
Conditions
• The VMIB Access option must be ON (PGM 113 - FLEX 2).