Call Handling 73
SBX IP 320 Features & Operation Guide
To cancel a wake-up time from a Station:
1. Press the [TRANS/PGM] button.
2. Dial 42.
3. Press the [HOLD/SAVE] button.
Conditions
• If a wake-up alarm is registered at a station, a * is displayed in front of the present time
on the LCD.
• If a VMIB is installed, the voice message for the wake-up time is heard 3 times and then
MOH is presented.
• If the wake-up ring is not answered after 3 times, it is canceled.
• If the System Attendant dials to wake-up fail station to erase wake-up fail ring, the fail
ring will disappear with confirmation tone. But when the Wake-up Fail Ring timer
expires, confirmation tone will not be provided and Fail Ring will disappear.
• If the [Wake-up Fail Ring Timer] is 0, wake-up fail ring will not disappear automatically.
• If the [Wake-up Fail Ring Timer] is 99, the fail ring is not given to attendant station.
• If the [Wake-up Fail Ring Timer] is 1-98, after Wake-up Fail Ring Timer expires, the
wake-up fail ring will disappear automatically.
Admin Programming
• Wake-up Fail Ring Timer (PGM 182 - FLEX 7)
To Next Page
Loading...
