Call Control 15
SBX IP 320 Features & Operation Guide
To change the authorization code at a Station:
1. Press the [TRANS/PGM] button.
2. Type 32.
3. Enter the current authorization code.
4. Type in the new authorization code.
5. Press [HOLD/SAVE] to accept changes.
Conditions
• Up to 200 authorization codes can be programmed on the System.
• Duplicate authorization codes cannot be assigned to more than one Station.
• If Loop LCR ACNT is set on a Station, the authorization code is required when the
station dials the Loop LCR CO Access code.
Admin Programming
• Authorization Code Table (PGM 227)
• DISA Account Code (PGM 141)
• CO Line Group Account (PGM 141)
• Loop LCR Account Code (PGM 111)
• 5 Digit Authorization Code Usage (PGM 161 - FLEX21)
• Station Account (PGM 112 - FLEX20)
To Next Page
Loading...
