ISDN Service 130
SBX IP 320 Features & Operation Guide
Admin Programming
• CLIP/COLP Table (PGM 201)
• CLIP Table Index (PGM 143 - FLEX 2)
• Call Type (PGM 143 - FLEX 3)
• ISDN CLI of STATION (PGM 114 - FLEX 12)
• ISDN CLIR (PGM 114 - FLEX 14)
• My Area Code (PGM 200 - FLEX 9)
• My Area Prefix Code (PGM 200 - FLEX 10)
CLI Message Wait
When a call exists through an ISDN DID line, calling line identification (CLI) of the incoming
call will be displayed on the LCD of the station. If the DID external party hangs up before an
Attendant or called station answers, the CLI provided by digital network will be stored in the
CO message wait queue of the original called station.
Operation
CLI MESSAGE WAIT FEATURE SUMMARY
BUTTONS CLI ACTIONS
[VOL UP/DOWN] See next CLI message
[HOLD] Make a recall according to CLI message
[CALLBK] Toggle CLI message and SPEED Name
[SPEED] + Bin # + [CONF] Store CLI message in SPEED dial bin
[CONF] Delete current CLI message
[DND] Delete all CLI messages
At ATD STA: [TRANS/PGM]+055 Delete all CLI messages at ATD station
To Next Page
Loading...
