Vertical SBX IP 320 - Memory Dialing; Auto Call Number Redial (ANCR)

Outgoing Call Access 137
SBX IP 320 Features & Operation Guide
Operation
To access a CO Line from a DKTU:
1. Lift the handset or press the [SPEAKER] button.
2. Press the desired CO Line, {POOL} button, or {LOOP} button.
-or-
Dial the individual CO Line Access Code, CO Group Access Code, or the first CO Line
Access Code from the accessible group.
To access a CO Line from an SLT:
1. Lift the handset.
2. Dial the individual CO Line, CO Group Access Code, or the first CO Line Access Code
from the accessible group.
To access a CO Line Group:
1. Lift the handset.
2. Press 8 for the CO Group.
3. Dial the CO Group number.
To assign the {LOOP} button:
1. Press the [TRANS/PGM] button.
2. Press {FLEX}.
3. Press [TRANS/PGM].
4. Dial 84.
5. Press the [HOLD/SAVE] button to accept changes.