Outgoing Call Access 152
SBX IP 320 Features & Operation Guide
To display and enter a Speed Dial bin by scrolling:
1. Press the [TRANS/PGM] button.
2. Press the [SPEED] button.
3. Dial the Speed Dial bin number.
4. Press the [UP] or [DOWN] key to display the next/previous Speed Dial number.
To store Station Speed Dial numbers from an SLT:
1. Lift the handset.
2. Dial the Speed Dial program code 555.
3. Dial the Speed Dial bin number (000-099).
4. Dial the desired phone number (up to 24 digits).
5. Press and release the hook-switch.
To make a call using Station Speed Dial from an SLT:
1. Lift the handset.
2. Dial the Speed Dial access code 558.
3. Dial the Station Speed dial bin (000-099).
To delete a Station Speed Dial from an SLT:
1. Lift the handset.
2. Dial the Speed Dial access code 555.
3. Dial the appropriate Station Speed Dial bin (000-099).
4. Press and release the hook-switch.
Conditions
• A CPTU should be installed to detect a dial tone.
• The Station Speed Dial is secured in data protect mode when the power is OFF.
• There can be a maximum of 24 digits in a station Speed Dial number including special
digits and function codes.
• If you dial an empty station Speed dial bin, an error tone will be heard.
• If you select a CO Line before dialing a Speed Dial bin number, the selected CO Line is
used even though there is a programmed CO Line in the Speed Dial bin number.
To Next Page
Loading...
