Paging 157
SBX IP 320 Features & Operation Guide
A user can respond to a page from any station and connect to the paging party for a private
conversation. The user should respond to the page in the Page Time-out duration to connect the
paging party.
Operation
To initialize a page:
1. Lift the handset or press the [SPEAKER] button.
2. Dial the desired paging code.
3. If assigned, after the page warning tone is presented, make the desired announcement.
4. Replace the handset and go on-hook.
To assign Meet-me Page at a FLEX button:
1. Press the [TRANS/PGM] button.
2. Press the desired FLEX button.
3. Dial 544.
4. Press the [HOLD/SAVE] button to accept changes.
To respond a Meet-me Page:
1. Lift the handset or press the [SPEAKER] button.
2. Dial 544 (Meet-me Page code).
-or-
In case of Nomad IP, dial Meet-me Page code and press [Send] button.
3. Press the [HOLD/SAVE] button. The call with the paging party is established and the
zone returns to idle.
ACCESS CODE ITEM
501-510 Internal Page Zones
506-510 = Conference page zones
543 Internal All Call Page
544 Meet Me Page
545 External Page Zone
549 All Call Page (Internal & External)
To Next Page
