Vertical SBX IP 320 - Preset Call Forward

Rerouting 163
SBX IP 320 Features & Operation Guide
To deactivate Call Forward:
1. Lift the handset or press the [SPEAKER] button.
2. Press the [DND/FOR] button.
3. Press the # key (Call Forward cancel code).
Condition
• To use Call Forward, a Station should be activated in Admin Programming.
Admin Programming
• Allow Off-Net Call Forward (PGM 111 - FLEX 18)
• Authorization Code Table (PGM 227)
Call Forward, Unconditional
A user forwards all calls immediately to another station, Hunt Group, or VMIB.
Operation
To activate Unconditional Call Forward:
1. Lift the Handset or press the [SPEAKER] button.
2. Press the [DND/FOR] button.
3. Dial the Call Forward code 1.
4. Dial Station or Group pilot number to receive the calls.
5. Replace the handset and go on-hook.
To assign {CALL FORWARD} button at a flexible button:
1. Press the [TRANS/PGM] button.
2. Press a flexible button.
3. Press the [DND/FOR] button.
4. Assign Call Forward type 1.
5. Dial the destination that will receive the call.
6. Press the [HOLD/SAVE] button to accept changes.