Vertical SBX IP 320 - Page 180

Rerouting 170
SBX IP 320 Features & Operation Guide
Operation
To activate incoming CO Line off-Net at the Attendant:
1. Lift the handset or press the [SPEAKER] button.
2. Press the [DND/FOR] button.
3. Dial Call Forward code 7.
4. Dial CO Line/group access code (9, 801-8xx, 8801-88xx, or 8* for all CO Lines) or press
{CO Line} button.
5. Dial the Speed Dial bin number with the desired telephone number.
6. Replace the Handset and go on-hook.
To deactivate CO Line Off-Net Call Forward (from the attendant station):
1. Lift the Handset or press the [SPEAKER] button.
2. Press the [DND/FOR] button.
3. Dial Call Forward code 7.
4. Dial CO Line/group access code (9, 801-8xx, 8801-88xx, or 8*) or press {CO Line}
button.
5. Dial number.
Conditions
• If there is no idle CO Line, Off-net Call Forward is not activated.
• This feature is not applicable for DID lines.
• It is unconditional and forwarded immediately when the CO Line rings in the system.
• If a speed bin is programmed in a Flexible button, you may press the Flexible button
instead of dialing the speed bin number.
• Toll restriction will be based on the COS of outgoing CO Line.