Rerouting 173
SBX IP 320 Features & Operation Guide
• A call forwarding station cannot leave a VMIB message.
• The call forward feature may be canceled by code 559; the unified cancel code for
DND/Call Forward/Message for SLT.
• Dial pulse SLT cannot be forwarded to VMIB.
Admin Programming
Call Forward (PGM 111 - FLEX 2)
VMIB Access (PGM 113 - FLEX 2)
Preset Call Forward
When a station receives incoming CO Calls and the Station is programmed to Preset Call
Forward, the call is routed to the Preset Call Forward destination if the station does not answer
within the Preset Call Forward Timer.
The destination can be another Station or a Hunt Group.
Conditions
• In Preset Call Forward, a busy station will not receive a CO Line ring and the next
assigned station will receive the CO Line ring. If the station is not forwarded to another
destination, then the call will not be forwarded and will continue to ring at the station
until answered.
• The Preset Call Forward loop feature is not available (A>B>C>A).
• When a CO Line is forwarded with Preset Call Forward, the original station will stop
ringing (the LED of {CO} button will flash continuously).
• If there is no direct {CO} button or {LOOP} button at destination station, the station will
be bypassed.
Admin Programming
• Preset Call Forward (PGM 121)
• Preset Call Forward Timer (PGM 181 - FLEX 12)
To Next Page
Loading...
