Call Handling 23
SBX IP 320 Features & Operation Guide
To cancel LCD Messages (Custom/Pre-selected) by the System Attendant:
1. Press the [TRANS/PGM] button.
2. Dial 052.
3. Press the [HOLD/SAVE] button.
Admin Programming
• Refer to the SBX IP 320 Installation Manual, Numbering Plan (PGM 106)
Pre-selected Message
A User can choose from pre-selected messages (1-10) to be shown on the calling party LCD.
Detail information is entered by each User (e.g. Time, Date or Station number).
The pre-selected messages include:
Message 01: LUNCH, RETURN AT HH:MM
Message 02: ON VACATION /RETURN AT DATE MM:DD
Message 03: OUT OF OFFICE/RETURN TIME HH:MM
Message 04: OUT OF OFFICE/RETURN AT DATE MM:DD
Message 05: OUT OF OFFICE/RETURN UNKNOWN
Message 06: CALL: (Telephone No: Up to 17 digits)
Message 07: IN OFFICE: STA XXXX
Message 08: IN A MEETING/RETURN TIME HH:MM
Message 09: AT HOME
Message 10: AT BRANCH OFFICE
Operation
To activate LCD Messages (Custom/Pre-selected) from a Station or from the System Attendant:
1. Press the [TRANS/PGM] button.
2. Dial 51.
3. Dial the 2-digit message code 00 or 01-10.
4. Press the [HOLD/SAVE] button.
To Next Page
Loading...
