Call Handling 42
SBX IP 320 Features & Operation Guide
To assign a direct button (i.e., CO or DSS button):
1. Press the [TRANS/PGM] button.
2. Press the FLEX Button to be assigned.
3. Type the desired Code.
4. Press the [HOLD/SAVE] button.
To assign a Telephone Number (7208D/7224D DKTU):
1. Press the [TRANS/PGM] button.
2. Press the FLEX Button to be assigned.
3. Press the [TEL NUM] soft button.
4. Type the desired telephone number.
5. Press the [HOLD/SAVE] button.
Conditions
• A flexible button that is not assigned as a {CO Line} button is considered a Feature
button and is programmable at each Station.
• When ADMIN program 112 - FLEX 6 (CO Line Programming) is enabled, the flexible
button that is assigned as a {CO line} button can be programmed.
Admin Programming
• Flexible Button Assignment (PGM 115)
• CO Line Programming (PGM 112 - FLEX 6)
To Next Page
