Vertiv Liebert iCOM - Page 141

Device Serial Number Override
Enables/disables use of the serial number obtained from the managed device.
Site Equipment Tag Number
Number from the site equipment tag.
Site Identifier
Site identification number.
Device Instance ID
Manufacturer's device identification number.
Service Center Country
Country in which the device is serviced.
Remote Services Connectivity
Remote Service Connectivity Options and Settings
Connectivity Test Result
Result of most recent connectivity test.
Test Connectivity
Initiates connectivity test.
Evaluate Remote Services Configuration
Attempt to connect to the remote service to verify the configuration.
Remote Service Platform URL
URL address of the remote-service platform. Do not enter the "http://" or "https://" prefix.
Connection Retry Time
Length of time to attempt reconnection in the event of a communication failure. Range is 30 to 600 seconds.
Proxy Enable
Enables use of remote service platform URLto connect with a proxy server.
Proxy Authentication
Enables authentication of the proxy server.
Proxy Address
IP or URLaddress of the proxy server.
8 External Monitoring andBuilding ManagementSystems
133
Vertiv™ Liebert® iCOM™Installer/User Guide