Vertiv Liebert iCOM - 1.9 Advanced Menu

Backup & Security
Opens the Backup & Security menu:
• Display Backup and Restore: See Backing Up and Restoring Control Board Settings on page163 .
• Control Backup and Restore: See Backing Up and Restoring Control Board Settings on page163
• Display Upgrade: See Updating Vertiv™ Liebert® iCOM™ Control Board Firmware on page161 .
• Control Upgrade: See Updating Vertiv™ Liebert® iCOM™ Control Board Firmware on page161 .
• Manage Permissions: See Managing Access Permission and Passwords on page164 .
Turn Unit On/Off
Depending on unit’s status, open the TURN UNIT ON or TURN UNIT OFF dialog. See Powering On the Thermal
Management Unit on page7 , or Powering Off the Thermal Management Unit on page8 .
1.9 Advanced Menu
The advanced menu provides a read-only view of the advanced set up and factory level settings.
1.9.1 Advanced Menu Options
Factory Settings
Unit code and configuration settings.
Diagnostics
Details about control and cooling operation.
Expert Settings
Parameters and settings for use by trained professionals only.
Compressor Info
Details about compressor state and operating mode.
Tandem Info
Details about tandem compressor states and operating modes.
MBV Settings
Motorized ball valve settings (water cooled heat rejection).
Runtime Monitoring
Details about component run times.
Modbus Devices
Information about connected Modbus devices such as power and flow meters.
1 Getting Started with Vertiv™ Liebert® iCOM™Installer/User Guide
12
Vertiv™ Liebert® iCOM™Installer/User Guide