Vertiv Liebert iCOM - 8.2.6 Network Configuration

8.2.6 Network Configuration
1. Touch , then > BMS & Teamwork > IS-Unity  Setup > Configuration > Network.
2. Adjust the settings, and touch Save.
Network Setting Options
Speed Duplex
Selects the speed and duplex configuration of the card’s Ethernet port. It is set to Auto by default. If it requires
changing, contact the system administrator for the proper settings.
Hostname
Identifies the network node. Default is UNITY-serial_number_of_card.
Domain Name Suffix List
Listing of domain name suffixes for resolution of host names. If it requires changing, contact the system administrator
for the proper setting.
Telnet Server
Enables/disables telnet access to the card to prevent unauthorized changes. The default setting disables telnet access.
SSHv2 Server
Enables/disables SSHv2 (Secure Shell) access to the card to prevent unauthorized changes. The default setting
disables SSHv2 access.
8 External Monitoring andBuilding ManagementSystems
127
Vertiv™ Liebert® iCOM™Installer/User Guide