Vertiv Liebert iCOM - 3 Service Operation; 3.1 Editing Setpoints for the Cooling Unit

3 Service Operation
3.1 Editing Setpoints for the Cooling Unit
Setpoints are the means by which cooling unit operation is controlled.
NOTE: Depending on the type of thermal management unit, included components, and control settings of your system,
all of the options listed may not be available on your Vertiv™ Liebert® iCOM™ display.
3.1.1 Setpoints Options
Fan Control
See Configuring Fan Setpoints on page43 .
High/Low Limit Control
See Configuring High/Low Limit Setpoints on page39 .
Humidity Control
See Configuring Humidity Setpoints on page40 .
Static Pressure Settings
See Configuring Static Pressure Setpoints on page47 .
Temperature Control
See Configuring Temperature Setpoints on the next page .
Temperature Compensation
See Setting Temperature Compensation on page37 .
3 Service Operation
23
Vertiv™ Liebert® iCOM™Installer/User Guide