Vertiv Liebert iCOM - 1.8 Service Menu

About
Opens the ABOUT panel. See About Vertiv™ Liebert® iCOM™ Version on page9 .
Turn Unit On/Off
Depending on unit’s status, open the TURN UNIT ON or TURN UNIT OFF dialog. See Powering Off the Thermal
Management Unit on page8 , or Powering Off the Thermal Management Unit on page8 .
1.8 Service Menu
The service menu lets you view and edit setpoints and perform many other functions.
1.8.1 Service Menu Options
Setpoints
Opens the SETPOINTS panel. See Editing Setpoints for the Cooling Unit on page23 .
Diagnostic/Service
Opens the Diagnostic/Service menu:
• Diagnostics: See Performing Diagnostics on page165 .
• Technical Support: Contact information for the cooling unit and Vertiv™ Liebert® iCOM™ display.
Alarm/Event Setup
Opens the ALARMS & EVENTS panel. See Managing Events: Alarms,WarningsandMessages on page81
BMS & Teamwork
Opens the BMS & Teamwork menu:
• U2U Setup: See Configuring U2U Network Settings on page98 .
• Teamwork/Standby: See Teamwork, Standby and RotationforCoolingUnits on page101
• BMS Setup: See BMS and Vertiv™ Liebert® IntelliSlot™ Settings on page117
Scheduler
Opens the SCHEDULER panel. See Scheduling Condenser and Cooling Unit Tasks on page50 .
Options Setup
Opens the OPTIONS SETUP panel. See Setting General Thermal Management Unit Options on page53 .
Auxiliary Device Setup
Opens the Auxiliary Device Setup menu:
• Sensors: See Wired Remote Sensors on page157 .
1 Getting Started with Vertiv™ Liebert® iCOM™Installer/User Guide
11
Vertiv™ Liebert® iCOM™Installer/User Guide