E-mail Messaging Configuration
1. Touch , then > BMS & Teamwork > IS-Unity
Setup > Configuration > Messaging > Email.
2. Adjust the settings, and touch Save.
E-mail Settings
E-mail From Address
Sender’s e-mail address. In most cases this will be the e-mail address of the person to whom replies should be sent. For
example, Support@company.com
E-mail To Address
E-mail address of the recipient. Multiple e-mail addresses should be separated by a semicolon.
E-mail Subject Type
Subject of the email. This value will default to the event description. The subject line can be customized.
Custom Subject Text
The subject of the email can be changed
SMTP Server Address
Fully qualified domain name or IP address of the server used for relaying email messages. If using a server name, a DNS
server may need to be configured under Network Settings.
SMTP Server Port
SMTP server port.
SMTP Connection
SMTP server connection type. Determines the capabilities of the SMTP server. Options are:
• Clear: Do not use encryption
• SSL/TLS: Encryption using SSL/TLS connection
• STARTTLS: SSL/TLS encryption initiated using STARTTLS.
SMTP Authentication
Enable or disable email SMTP authentication. An e-mail account must be provided for the SMTP service provider to
authenticate.
NOTE: Some e-mail servers may require account-configuration changes to allow communication with the Unity card.
For example, Gmail only recognizes Google applications as being secure. However, they provide an account setting
that allows authentication with what they consider “less-secure apps.” Please see your network administrator or
service provider for configuration details.
8 External Monitoring andBuilding ManagementSystems
137
Vertiv™ Liebert® iCOM™Installer/User Guide
To Next Page
Loading...
