SMS Messaging Configuration
1. Touch , then > BMS & Teamwork > IS-Unity
Setup > Configuration > Messaging > SMS.
2. Adjust the settings, and touch Save.
SMS Settings
SMS From Address
The sender’s SMS address. In most cases this will be the SMS address of the person to whom replies should be sent. For
example, Support@company.com.
SMS To Address
The SMS address of the recipient. Multiple SMS addresses should be separated by a semicolon.
SMS Subject Type
Subject of the message, either default or custom.
Custom Subject Text
The subject of the message. The subject can be customized by the customer.
SMTP Server Address
Fully qualified domain name or IP address of the server used for relaying SMS messages.
NOTE: If using a server name, a DNS server may need to be configured under Network Settings.
SMTP Server Port
SMTP server port.
SMTP Connection
SMTP server connection type. Determines the capabilities of the SMTP server. Options are:
• Clear: Do not use encryption.
• SSL/TLS: Encryption using SSL/TLS connection.
• STARTTLS: SSL/TLS encryption initiated using STARTTLS.
SMTP Authentication
Enable or disable SMS SMTP authentication. An SMS account must be provided for the SMTP service provider to
authenticate.
NOTE: Some messaging servers may require account configuration changes to allow communication with the Unity
card. For example, Gmail only recognizes Google applications as being secure. However, they provide an account
setting that allows authentication with what they consider less-secure apps. Please see your network administrator or
service provider for configuration details.
8 External Monitoring andBuilding ManagementSystems
139
Vertiv™ Liebert® iCOM™Installer/User Guide
To Next Page
Loading...
