Vertiv RPC2 - PDU Explorer Tab Navigation

cli->current 2 L1
[2] --- (L1) 1.70 A
To view the neutral current for PDU2, enter the following command.
cli->current 2 N
[2] --- (N) 0.10 A
To view the current for all lines of PDU2, enter the following command.
cli->current 2 @
[2] --- (L1) 1.70 A (L2) 1.60 A (L3) 0.00 A (N) 0.10 A
To view the current for branch B of PDU2, enter the following command.
cli->current 2.B
[2] --- (B) 1.10 A
To view the current for receptacle 6 of branch Cof PDU2, enter the following command.
cli->current 2.C.6
[2.C] --- (6) 0.00 A
To view the current threshold for PDU2, enter the following command.
cli->current threshold 2
[2] --- (L1) 85 : 80 : 5 (L2) 85 : 80 : 5 (L3) 85 : 80 : 5 (N) 85 : 80: -
Vertiv | RPC2™ Communications Module Command Reference Guide | 11