Video Devices PIX-E5 - Toggling Drop Frame Timecode; Setting the Rec Run Timecode Value

User Guide
60
option Description
Record Run Record Run timecode mode sequentially stamps les with timecode
based on the camera’s frame rate. Each subsequent recording starts on
the timecode value from where the previous recording stopped.
Toggling Drop Frame Timecode
Sometimes a production requires the use of drop frame timecode, and it is nec-
essary to ensure the monitor stamps les as drop frame accordingly.
To toggle drop frame timecode:
1. Press the MENU button.
2. Select Timecode > Drop Frame Enable.
3. Select Off or On.
Setting the Rec Run Timecode Value
Record run timecode mode stamps les sequentially, with the rst le being
stamped from a specied value. This value is 00:00:00:00 by default, but it can
be set to any value. Every time this value is set, the next recording will begin
at that value and subsequent recordings will start on the timecode value from
where the previous recording stopped.
To set the record run timecode value:
1. Press the MENU button.
2. Select Timecode > Set Rec Run Value.
3. Turn the Control knob to set the highlighted value.
4. Press the Control knob to move to the next value.