Video Devices PIX-E5 - Uploading Custom Luts

User Guide
36
Uploading Custom LUTs
Custom lookup tables in .cube le format may be used with PIX-E monitors
from either a SpeedDrive or SD card.
To upload a custom LUT:
1. Ensure the SpeedDrive or SD card has been formatted by the PIX-E moni-
tor. For more information on formatting drives with the PIX-E montior, see
Formatting Storage Drives.
When the drive or card is formatted by the PIX-E monitor, a LUTs folder is
created. All custom LUTs must be placed in this folder for the monitor to
properly identify and retrieve the .cube les.
i Do not use a period in the LUT le name.
2. Insert the SpeedDrive or SD card into a computer.
3. Copy the custom LUT (.cube le) to the LUTs folder on the SpeedDrive or
SD card.
4. Mount the SpeedDrive or insert the SD card into PIX-E monitor.
All custom LUTs will be appended to the end of the list available for selec-
tion via MENU > LUTs.