Video Devices PIX-E5 - Checking Version and Serial Number; Saving and Recalling Settings

63
SYSTEM FUNCTIONS
The monitor will search connected drives for a .prg le. When the .prg le is
found, follow the on-screen instructions to perform the rmware update.
i Firmware updates will take several minutes to complete, and the unit will reboot
multiple times during the process. Various functions and ports will become inac-
tive while rmware is updating. The monitor is ready to use when it returns to the
main display.
8. (Optional) Verify the rmware version by pressing the MENU button and
selecting System > Version Info.
Checking Version and Serial Number
For convenience and support issues, the monitor’s rmware version and serial
number can be viewed from the Main menu.
To check the rmware version and serial number:
1. Press the MENU button.
2. Select System > Version Info.
A dialog with information is displayed, including the rmware version on the
rst line and the monitor’s serial number at the bottom.
Saving and Recalling Settings
All settings on the monitor can be stored for easy recall at a later time. This is
useful for recalling settings for different work ows or projects, or when setting
up multiple PIX-E monitors with the same settings.
To save settings to SD card or SpeedDrive:
1. Press the MENU button.
2. Select one of the following:
◦ Save/Load Settings > Save Settings to SpeedDrive
◦ Save/Load Settings > Save Settings to SD Card
3. Use the on-screen keyboard (Or attached USB keyboard) to enter a name
for the settings le.
4. Select OK (Or press Enter on an attached USB keyboard) to save the set-
tings le.
To recall settings from the SD card or SpeedDrive:
1. Press the MENU button.
2. Select one of the following:
◦ Save/Load Settings > Load Settings from SpeedDrive
◦ Save/Load Settings > Load Settings from SD Card.