Video Devices PIX-E5 - Setting the Date and Time; Updating Firmware

User Guide
62
Setting the Date and Time
Before setting the date and time, Time Zone and Daylight Saving should be
congured properly.
To select a time zone and set daylight saving:
1. Press the MENU button.
2. Select System > Time Zone.
3. Select the correct time zone for your location.
4. Select System > Daylight Saving.
5. Select On or Off.
To set the date and time:
1. Press the MENU button.
2. Select System > Set Date/Time.
3. Turn the Control knob to set the highlighted value.
4. Press the Control knob to move to the next value.
Updating Firmware
Firmware updates are released periodically to improve the functionality and add
new features to the monitor. Firmware updates are performed with a .prg le
obtained from the Video Devices website.
To update rmware:
1. Download the .prg le to a computer.
2. Connect an SD card or SpeedDrive to the computer.
3. Copy the .prg le to the SD card or SpeedDrive.
4. Remove the SD card or SpeedDrive from the computer and connect it to the
monitor.
5. Power up the monitor.
⚠ Ensure that the monitor is powered via the supplied PIX-E PSU and
fully-charged batteries. Power loss during a rmware update can result in
the monitor becoming inoperable. In the unlikely event that power is lost
during a rmware update, a computer and the USB boot cable, included
with the monitor, may be used to reinstall the rmware and recover oper-
ation. Contact Customer Support for proper recovery procedures.
6. Press the MENU button.
7. Select System > Update Firmware.