1-2 Safety Conventions Used in the Manual Rev AA
Videojet DataFlex 6420 Operator Manual
Safety Conventions Used in the Manual
Specific safety information is listed throughout this manual in the form of
Warning and Caution statements. Pay close attention to these statements
as they contain important information that help in avoiding potential
hazards to yourself or to the equipment.
General Warning Notices
The following warnings supplement the specific warnings that appear
elsewhere in the manual. These are general warnings that must be read,
completely understood, and applied by all the personnel involved in the
operation, and/or the maintenance of the machine.
PERSONAL INJURY. Only trained service or maintenance
personnel should perform the installation procedures. Qualified
personnel who have successfully completed the training courses,
have sufficient experience with this printer, and are aware of the
potential hazards to which they will be exposed.
PERSONAL INJURY. Before attempting any maintenance or repair
on any part of the product, disconnect the printer from the main
power supply and isolate the printer from any external energy
sources including other connected equipment.
PERSONAL INJURY. Before connecting the compressed air supply
to the printer, ensure that the air supply has been isolated. Turn the
regulator adjustment knob counterclockwise.
PERSONAL INJURY. The printer uses an operator control console.
Ensure that this panel is mounted at an appropriate working height
and orientation for ease of operation.
To Next Page
Loading...