1-4 Safety Conventions Used in the Manual Rev AA
Videojet DataFlex 6420 Operator Manual
General Caution Notices
The following caution statements supplement the specific cautions that
appear elsewhere in the manual. These are general cautions which must
be read, completely understood, and applied by all the personnel involved
with the operation, and/or the maintenance of the machine.
EQUIPMENT DAMAGE. Before and after performing any
maintenance or repair on the product, check that the two safety
labels are clearly visible. One is on the power supply cover (internal
to the controller) and the other by the potential nip point next to the
pulley in the printer body.
EQUIPMENT DAMAGE. The use of incompatible ribbon can
seriously damage your printer and such damage will not be covered
by your printer warranty. Use only the ribbon approved by your
dealer.
To Next Page
Loading...