VIDEOJET DataFlex 6420 - Clearing a Fault Message or Warning

Rev AA Working with Fault Messages and Warnings 5-3
Videojet DataFlex 6420 Operator Manual
Clearing a Fault Message or Warning
The instructions in this section provide information on how to clear a fault
message. A similar procedure is used to clear warnings.
To view the details of the fault list, proceed as follows:
1 Touch the red FAULT message to view the list of faults 
(Figure 5-2).
2 Touch the fault name in the list to read more details about the fault.
3 Read the details of the fault and the on screen instructions that tell you
what to do about the fault.
Figure 5-2: Fault Selection