2-2 About this Manual Rev AA
Videojet DataFlex 6420 Operator Manual
compared to earlier systems. It can print barcodes, dates, text, and
graphics onto flexible packaging films and labels.
The printer is a suitable replacement for either hot stamp or rotary coders.
It can print in either of the following modes:
• Intermittent Mode (i.e., while the substrate is stationary)
• Continuous Mode (i.e., while the substrate is moving)
It is suitable for use on most horizontal form/fill/seal, vertical form/
fill/seal, and self-adhesive labelling machines.
The product is available in either left-handed or right-handed versions to
suit different configurations of the packaging machine.
The product is available in the following models:
• Standard - 53 mm print width option
• Standard - 107 mm print width option
About this Manual
This manual is intended for the operator and contains information on the
routine operation of the printer, including routine cleaning and
maintenance tasks. Unless noted otherwise, all procedures in this manual
can be performed by the operator of the printer.
Note: Installation and service procedures are described in the service manual
(refer “Related Documents” on page 2-3).
This manual is a supplement to (and not a replacement for) formal
training.
To Next Page
Loading...