5-16 Viewing the Printer Performance Statistics Rev AA
Videojet DataFlex 6420 Operator Manual
Viewing the Printer Performance Statistics
The following basic production performance details are shown on the
CLARiTY
®
home page:
• Product Throughput— It signifies the packs coded per minute.
• Total Count— It signifies the total packs coded by the printer.
• Batch Count— It signifies the total packs coded on the current job.
This is reset to zero each time a new job is selected.
To view more information about performance statistics, touch the
Performance area on the home page.
Cleaning the Printhead
EQUIPMENT DAMAGE. The use of an incompatible cleaning kit
can seriously damage your printer. Such damage will not be covered
by your printer warranty. Use only cleaning kits approved by your
dealer.
To maintain maximum print quality, you should clean the printhead
every time the ribbon is changed.
To clean the printhead, proceed as follows:
1 Switch the printer to the OFFLINE state.
2 Remove the cassette and place it aside.
Note: Do not attempt to clean the printhead with the cassette in place.
To Next Page
Loading...