111User Manual Visit the ViewZ USA website at https://www.viewzusa.com
Figure 11-2 Security page
2. Setup Security Authentification
CONFIGURATION / PROTOCOL
Description
Step 1 Choose Protocol > Security.
The Security page is displayed as shown in Figure 11-2. Table 11-2 describes the parameters on the Security
page.
Step 2 Click Apply.
A dialog box is displayed, indicang the parameter conguraon success. To make the conguraon take eect,
click Conrm to restart the device.
Table 11-2 Security parameter
User Vericaon When you select the User Verification check box,
as those for logging in to the device web page.
the user name and password must be the same
DescriponFuncon Procedure
[Setting method] Click the button on
to enable User Verification.
NOTE
• The default user name is admin, and the
default password is admin.
To Next Page
Loading...
Need help?
General
