98 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
CONFIG. / NETWORK SERVICE
7. Setup IP Filter Parameters
Description
Procedure
Step 1 Choose Network Service > IP Filter.
The FTP page is displayed, as shown in Figure 9-7.
Figure 9-7 IP Filter page
Figure 9-8 IP Filter page - add white/black IP list
Set the IP address in specied network segment to allow access or prohibit access.
Step 2 Click the buon on to enable IP Filter.
Step 3 Set the parameters according to Table 9-6.
To Next Page
Loading...
Need help?
General
