ViewZ VZ-IP-PVM-N Series User Manual

85User Manual Visit the ViewZ USA website at https://www.viewzusa.com
Configuration of the Privacy Mask Function
CONFIGURATION / PRIVACY MASK
Procedure
Step 2 Click the buon on to enable Privacy Masking, and congure the privacy mask type,
color and alpha parameters.
Step 3 Press and hold the le mouse buon, and drag on the preview image to cover the part to be masked.
Choose Conguraon > Privacy Masking.
The Privacy Masking page is displayed, as shown in Figure 8-1.
Note
• The maximum percentage of an image that can be masked depends on the device model. Read the p
displayed on the page. A maximum of ve areas can be masked.
• You can click Refresh to congure the masked areas again.
• Delete buon is to delete Masking area. Modify buon is to redraw the masking area of current masking.
Figure 8-1 Privacy Masking Page
Click & Drag
Click 'Add'
q
w

ViewZ VZ-IP-PVM-N Series Specifications

General

Brand	ViewZ
Model	VZ-IP-PVM-N Series
Category	Monitor
Language	English