ViewZ VZ-IP-PVM-N Series User Manual

56 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
6. Object Left
CONFIG. /INTELLIGENT ANALYSIS
Function Definition
Function Settings
Figure 6-16 Object Left Interface
Step 1 Select Conguraon > Intelligent Analysis > Object Le to access the Object Le seng interface, as
shown in Figure 6-16.
The object le funcon refers to that an alarm is generated when the dwelling me of an
object within the deployment area meets the set shortest dwelling me.
Step 2 Set all parameters for the Loiter. Table 6-6 describes the specic parameters.

ViewZ VZ-IP-PVM-N Series Specifications

General

Brand	ViewZ
Model	VZ-IP-PVM-N Series
Category	Monitor
Language	English